Fencer
Manufacturer: Fieldmaster
Fieldmaster’s Fencer series of post drivers are New Zealand’s most popular post driver for beef and dairy farmers. An 8:1 rope-pulley configuration means the hammer falls faster allowing you to power through the job. The Tri-beam mast is 110% stronger than a standard UB section beam meaning you get longer life out of your farm equipment. Fitted with a 230kg hammer weight, top link, side tilt and main lift ram as standard. We also offer a huge range of options to fit rockspikes, augers, folding masts and hydraulic side shifts. The minimum required hydraulic oil flow for this machine is 18ltrs per minute.
DESCRIPTION
Features:
230kg (506lb) hammer
4.0m H.D. TRI-BEAM mast
4-bank valve hydraulic side angle
Hydraulic top link
18 ltrs per min required at 1800 PSI
New Zealand Made
SPECIFICATIONS
Feature | Fencer |
|---|---|
Standard Mast Length | 4m |
Weight (inc Hammer) | 505kg |
Standard Hammer Weight | 230kg |
Side Tilt Operation | Hydraulic |
Top Link Operation | Hydraulic |
Linkage Mounting | Cat 1&2 |
Height Under Hammer (4m mast) | 3700mm |
Height Under Hammer (4.5m mast) | 4200mm |
Min Recommended PSI (Max) | 1800PSI (3000PSI) |
Min Hydraulic Flow (Max) | 18L/Min (60L/Min) |
Side Tilt Sngle (L to R) | 20/20 |
Top Link Angle (Fwd/Back) | 20/28 |
*Due to continuous manufacturing improvements specifications may vary
OPTIONS
280Kg Hammer weight
4.5m folding mast
Hydraulic side nudge ram
Hydraulic rockspike kit
Hydraulic auger kit
Closed circuit hydraulic valve system
OPERATORS MANUAL & SET UP VIDEO
Instructional Post Driver Set Up Video -
CONTACT US
RELATED PRODUCTS
Contact Us
Opening Hours
Mon: | 8am - 5 pm |
Tue: | 8am - 5pm |
Wed: | 8am - 5pm |
Thu: | 8am - 5pm |
Fri: | 8am - 5pm |
Sat: | Closed |
Sun: | Closed |
Address
34 Ingram Road
Rukuhia, Hamilton 3282